Fuel System & Injector Tools

The Draper Expert Lambda/Oxygen Sensor Socket is designed for a variety of automotive maintenance tasks. This 22mm socket features a 3/8" square dr...

Specially designed socket for removal and replacement of diesel injectors without damaging the fuel lines. Features Size: 27mm x 1/2"D. Length: 79m...

Designed to screw directly on to the AdBlue® tank filler neck where the vehicle is fitted with an angled filler neck (on the outside of the vehicle...

A set of 3 angled AdBlue® fuel line quick connectors allowing for tight connections on 6mm fuel lines. The 90° (elbow) angle provides easier fixing...

M12 to fit older style injectors equipped with an M12 high pressure pipe union of the top of the injector. Features Size: M12. Internal. 5/8" UNF s...

Kit designed to safely remove the petrol injectors on Ford EcoBoost GDI 1.0, 1.5, 1.6 and 2.0L engines. Also suitable for use on various JLR vehicl...

Suitable for unleaded fuel, diesel, oil & AdBlue®.Specification : SAEJ30R6.Tube : Black NBR. Reinforcement : Polyester Yarn.Cover : Black, Smoo...

A specialised tool, used to assist the extraction of the copper washers used to seal diesel injectors where they enter the cylinder head. Features ...

For the removal and replacement of connections when replacing the fuel filter on a wide variety of engines. Features Application: Audi, Fiat, Merce...

Installation kit for Volvo injector sleeves, designed for use with injector sleeve remover and installer. Features Application: Volvo (FM) trucks. ...

Diesel injector extractor for 2.7L V6 and 3.6L V8 CR engines fitted to Jaguar, Land Rover and Range Rover. Features Applications: Land Rover 3.6L T...

Diesel injector socket for Ford Duratorq engines. Features Size: 21mm x 1/2"D. Length: 89mm. External diameter: 33mm. With window. Manufactured fro...

Series of injector adaptors for use in conjunction with slide hammers and air hammer extractor tools for the removal of specific diesel injectors. ...

From 2011, the method of removing the fuel pump sprocket changed. This tool enables the pump removal without removing the timing chain; works in co...

An essential kit for CR Diesel Injector repair. Includes special tools to loosen and remove the injector's internal fixings. Features Applications ...

Designed to allow the removal of the chain driven high pressure diesel injection pump without removing the timing chain or disturbing the engine ti...

Fuel tank sender, and pump locking ring remover, covering a wide range of BMW, Land Rover and Mercedes-Benz models. Features Land Rover Application...

A special tool designed to remove (stuck injectors) and install injectors in BMW petrol engined models with N20, N26 and N55 engine codes. Features...

For undoing quick release connections on fuel feed pipe lines. Features Applications include: Opel, Vauxhall, Fiat, Volkswagen, PSA. Composite hand...

For efficient cleaning of the injector port and seating surface prior to fitting new injectors. Features Helps to avoid blow-back due to poorly sea...

Specially introduced fuel line pliers for use on three ended hose clips fitted to fuel lines. Features Applications: Audi, Seat, Skoda & Volksw...

Required for Denso injectors. Features Thread size: M20 x 1.0. External thread. 5/8" x 18tpi UNF internal thread to fit most slide hammers - see L...

This tool kit assists the removal and installation of the high pressure petrol injectors used on direct injection VAG engines. Designed to help pre...

Designed to screw directly on to the AdBlue® tank filler neck where the tank is fitted with a vertically accessed filler (e.g. under boot floors or...