Engine Service & Cooling Tools

A 3 piece stud fitting kit for 6, 8 & 10mm studs. Specially designed to allow the studs to be torqued up without damaging the stud threads. Fea...

This tool has been designed specifically for removing the ignition coil on BMW motorcycles. Intended as an alternative to the plastic tool supplied...

Optical refractometer designed for checking the concentration of AdBlue®. Features Includes refractometer, precision screwdriver and dropper. Only ...

Side lever barrel pump suitable for pumping various (non corrosive) liquids such as oil, diesel and anti freeze from standard 205 litre barrels. Fe...

Drain plug wrench with 8 sizes on one tool. Features Square: 8 and 10mm; 3/8"& 1/2". Hex: 10, 12, 14 & 17mm. Length: 270mm. Manufactured fr...

Specifically designed for use on the injection lines on Mercedes-Benz Sprinter. Features Application: Mercedes-Benz Sprinter. Use with 3/8"D access...

A two in one wrench for oil service on many popular makes including BMW, Porsche and VAG. Features Applications: Audi A4, A6; BMW, Porsche Boxster;...

Diesel injector socket wrench set in 1/2"D for dismantling injector lines on most diesel engines. Features Sizes: 12, 14, 16, 17, 18 and 19mm in bi...

Manufactured from aluminium alloy and designed specifically for the removal of connections on in-line fuel filters. Features Applications: Alfa Rom...

This set of 1/2"D diesel injector nozzle sockets is primarily for Siemens and Bosch injectors. Features Applications include: Citroën and Peugeot w...

An Engine Support Beam with a capacity of 500kg. Features Working range: 460 - 1450mm. Height is adjustable from 0 - 270mm. Supplied with two short...

A medium weight slide hammer with 5/8" UNF thread and 10lb sliding hammer which can be used with a variety of tools for many applications including...

This hand operated barrel pump dispenses up to 250ml of fluid per stroke. Features Suitable for use on 5, 15, 55 gallon drums with either 3/4" or 2...

This 3 leg adjustable fuel tank sender wrench is designed for the removal of the retaining ring on the fuel tank sender units. Features Size range:...

This 3 piece Diesel Injector Puller Set comes complete with an extractor key for removing the inner part of the Bosch injectors. Fits Sprinter, ML2...

Suitable for removing the internal part of Bosch Injectors. Features For removing the internal part of Bosch injectors. 10mm Hex tamperproof bit. L...

Specifically designed for removing Delphi/Bosch diesel injectors. Adaptors can also be used with an air tool to loosen the injectors by vibration. ...

The specially designed toothed socket is for installing and removing the diesel injection nozzle on commercial vehicles. Features Applications: Mer...

Helps to test diesel injectors for opening pressure, leakage, spray patterns, atomization, chatter characteristics and leakage between the injector...

Remove and install copper washers on diesel injectors quickly and effectively with this special tool. Features Reach: 230mm. For deep seated inject...

This specialist kit is designed primarily for removing tight diesel injectors from Volkswagen engines. Due to the build up of carbon the injectors ...

This set of four diesel injector cutters ensures that the injector seat is bored and faced to the exact dimension when replacing or reconditioning ...

Especially designed for removing and installing fuel filter housing cap. Features Applications include: Honda i-DTEC diesel fuel filter housing cap...

The Sealey Oil Filter Crushing Unit OFC1 is designed for effective oil filter disposal. This unit crushes filters up to Ø115mm, allowing for the re...