Engine Timing & Locking Tools

Crankshaft rear oil seal fitting tool specifically designed for the Iveco Daily and Fiat Ducato 3.0L diesel engines. Designed to fit the seal in ac...

When rear crankshaft seals start to leak it requires a significant amount of work to access the seal and you do not want to do it twice! Correct fi...

Specialist tool for installing the front crankshaft seal as used on the DAF 85 truck (35-43 tons), without causing damage to either the oil seal or...

The inner alternator drive belt on the Renault 1.2 engines listed below use a stretchy type belt and require a special fitting tool. Due to the cra...

A specialist tool for installing the rear crankshaft seal as used on the DAF 85 truck (35-43 tons), without causing damage to either the oil seal o...

Serpentine belt tensioner release spanner designed specifically for the BMW and MINI B38 and B48 petrol engines. The slim curved design allows for ...

Designed to engage with the front bayonet style crankshaft oil seal and allow the user to remove and fit the seal. Specifically used on 2.0L AJ200 ...

Designed to install the TDC position sensor ring on the JLR TDV8 diesel engines found in the Range Rover and Range Rover Sport models. It is critic...

Double sided stretch belt tool suitable for safely removing and installing stretchy type drive/alternator belts and accessory belts without causing...

Specialist tool for installing the front crankshaft seal as used on the DAF 85 truck (35-43 tons), without causing damage to either the oil seal or...

Designed to allow damage-free fitting of the rear main crankshaft oil seal on the JLR 2.0L diesel “Ingenium” engine. When performing major engine r...

The Ducati X Diavel was launched with belt final drive in 2016. Unlike chain drive, belt drive systems must be kept under tension on both top and b...

Specially sized for the Delco Remy alternator pulley fitted to the 2.2L CDTi engine found across the Honda range. Features Go-thru 33 point externa...

Specialist tool for installing the front crankshaft seal, which comes with protective sleeve which is pushed out during installation. Suitable for ...

Sonic belt tension tester measures the vibration of the belt to assist with correct installation or tuning of toothed and 'V' belts. Features Suita...

Designed to fit the auxiliary belt tensioner found on DV4 and DV6 diesel engines on Citroën, Fiat, Ford and Peugeot vehicles. The 7725 Tensioner Wr...

A pair of tools designed to hold the timing belt camshaft pulleys securely while tightening or loosening the pulley fixings. Features Applications ...

Multi V-Drive Belts are almost universally used on auxiliary drive systems on modern motor vehicles. To ensure maximum belt life and avoid prematur...

For installing the stretchy type water pump belt on PSA and Vauxhall vehicles. Fit the tool to the water pump pulley and turn the engine by the cra...

Flywheel locking tool for Ducati 4V and 8V engines. Features Application 12 Ducati models from 2001 to 2011 including 620, 695, 750, 796, 800, 900,...

For the removal of the ignition flywheel from the crankshaft of Ducati Panigale 899 and 959 engines. Features Applications: Ducati Panigale 899 (fr...

For the removal of the ignition flywheel from the crankshaft of Ducati Panigale 1199 and 1299 engines. Features Applications: Ducati Panigale 1199 ...

Ideal for fitting stretchy belts to a wide range of vehicles. Features Universal tool, for use on most vehicles with a stretchy belt fitted. Two to...

Designed to allow the front crankshaft oil seal to be fitted in a controlled manner. Features Applications: VAG SQ7 4.0L TDi. Engine code: CZAC. Eq...