Engine Timing & Locking Tools

Designed to allow the rear (flywheel end) crankshaft oil seal fitted to Jaguar and Land Rover 2.2 Diesel engines to be installed without damage. Th...

Designed to undo the camshaft pulley fixings. Features Applications: Ducati 748 and 916 series. Drive: 19mm Hex. Manufactured from Stainless Steel....

Universal Clutch alignment tools for assembling and installing both single and double disc clutches on HGVs. Features Contents: 4 x steel adaptors:...

Designed to enable the removal of auxiliary drive belt pulleys that use ribbed belts. The 7114 has a left and right hand threaded clamping mechanis...

An alternator pulley holding and removal kit for Denso, Valeo, Bosch and Marelli alternators. Features 3 x 1/2"D Combination Drivers: 31 Spline x M...

Crankshaft rotator with 2 gears which allows the engine crankshaft position to be rotated manually. Features Applications: Iveco Euro Cargo and Car...

Belt tensioner gauge for use with final drive belts used on motorcycles. Features Applications: belt driven motorcycles including Triumph Thunderbi...

Trigger wheel installer required to install the crankshaft position sensor ring on certain Land Rover engines and install trigger wheel to rear cra...

Pulley wrench BMW N54/N55 engines Features Double ended with Star* T60 driver on each end. Applications: BMW N54/N55 engines. Saves time when repla...

Alternator V belt tool kit 5 pc. Fits most vehicles and includes 10mm Spline and Star* T50 pulley adaptors. Features For installing and removing th...

Helps to prevent damage to the oil seal and housing. Features Designed to be used on a variety of popular oil seal sizes. Seal installer diameters:...

Anodised aluminium crankshaft seal installation tool for correct fitting of the rear crankshaft seal with integrated sender wheel. Features Volkswa...

Required for setting the fuel pump and engine timing. Features Application: Renault Magnum. Black Manganese finish. Specifications Brand Laser To...

A crankshaft rotator for Renault and Volvo commercial vehicles which allows manual rotation of the engine; 26mm hex and 1/2" drive. Features Applic...

Allows the engine crankshaft position to be manually rotated. Features Applications: DAF trucks 65CF, 75CF, 85CF, 95XF, CF75, CF85, F65, F75, F85, ...

Allows the engine crankshaft position to be manually rotated. Features Applications: Volvo 6L and 12L engines. Covers engine codes: D9A, D12, D16C ...

A 1/2"D engine turning or 'barring' tool which allows the engine crankshaft position to be manually rotated, via the engine flywheel, for servicing...

An engine turning/barring tool that allows the engine crankshaft position to be manually rotated during servicing operations. Features Applications...

Used to extract motorcycle flywheel/alternators from the crankshaft taper. Features A combination tool that combines the 6 most common alternator/f...

A two piece tool set for installation of the stretchy auxiliary belt on BMW vehicles, intended as a substitute for the OE tools. Anodised aluminium...

For the safe removal of the alternator from the 3 cylinder Triumph engines. Features Application: Daytona 600 (2002 - 2005), Daytona 650 (2002 - 20...

Allows the engine crankshaft position to be manually rotated. Features Applications: DAF XF105 Euro etc. Manufactured from S45C steel with black ph...

Allows the engine crankshaft position to be manually rotated. Features Applications: MAN Atego and Vario. Manufactured from S45C steel with black p...

Allows the engine crankshaft to be manually rotated. Features Applications: Scania trucks manufactured after 1996. Manufactured from carbon steel w...